Evident LogoWabtec Logo

Eddy Current Array Products

Next-Generation Eddy Current Array Probes for Faster, More Reliable NDT Inspections

Discover our next generation of Eddy Current Array (ECA) probes.

Built for demanding inspections, these probes provide reliable surface and subsurface flaw detection with advanced PCB technology, an embedded encoder, a new wedge design, and a programmable remote switch.

Compatible with the NORTEC 700, the new ECA probe range supports automatic configuration, one connector type, detachable probe cables, integrated alarm LED indication, and easy-replace wear protection using Teflon tape.

The flex probe family expands inspection capabilities with exceptional flexibility for complex geometries. Designed to conform to challenging surfaces, these probes integrate seamlessly into existing inspection workflows and support custom 3D-printed wedges for maximum application versatility and part conformity.

Next-generation Eddy Current Array probes

Key innovations include:

  • Highly affordable detachable design with standardized unique connector type
  • Robust PCB based technology and active amplification ensure higher quality signals, excellent signal homogeneity, better repeatability, and higher SNR
  • New comfortable grip design reduces fatigue when scanning long hours
  • User programmable switch to erase data, null, or freeze the acquisition
  • Integrated alarm LED directly on the probe
  • Automatic recognition and configuration with the NORTEC 700i greatly simplify the setup
  • Direct replacement to legacy models written in procedures
  • Innovative new conformable wedge that adapts to the surface geometry and helps stabilizing signals
  • Integrated 12 counts/mm encoder that is user replaceable
  • Easy-replace wear protection with Teflon tape
  • Flex probe portfolio for greater geometric freedom with fewer physical and mechanical constraints.
  • Ability to design a custom wedge that matches the geometry of the parts being inspected (flex probes)

ECA Probe Models

SURF-25-008-300k3M-DP-A

SURF-25-008-300k3M-DP-A

Part number: Q2700082

This high-resolution surface ECA probe is designed for detecting very small surface-breaking flaws.

Typical Applications:

  • Crack detection around fasteners
  • Scribeline inspection
  • High-resolution detection of very small flaws
  • Detection of surface-breaking defects

Specifications

Specification Value
Coverage 25 mm
Resolution 0.8 mm
Frequency range 300 kHz to 3 MHz
Number of sensors 32
Detection capability 360° cracks
Encoder resolution 12 steps/mm
Distance from last sensor to probe tip/edge 1.1 mm from tip, 1.35 mm from side

SUBS-64-020-2k50k-DP-L

SUBS-64-020-2k50k-DP-L

Part number: Q2700079

This compact sub-surface ECA probe is ideal when access is restricted and a smaller footprint is required.

Typical Applications:

  • Corrosion detection under conductive material, including under aluminum lap joints
  • Crack detection under conductive material
  • Doubler edge inspection

Specifications

Specification Value
Coverage 64 mm
Resolution 2.0 mm
Frequency range 2 kHz to 50 kHz
Number of sensors 32
Detection capability Longitudinal and volumetric flaws
Encoder resolution 12 steps/mm
Distance from last sensor to probe tip 5.5 mm

SUBS-128-020-2k50k-DP-L

SUBS-128-020-2k50k-DP-L

Part number: Q2700080

This wide-coverage sub-surface ECA probe is designed for rapid scanning over larger areas.

Typical Applications:

  • Corrosion detection under conductive material, including under aluminum lap joints
  • Crack detection under conductive material
  • Doubler edge inspection
  • Large-area inspections requiring faster scanning

Specifications

Specification Value
Coverage 128 mm
Resolution 2.0 mm
Frequency range 2 kHz to 50 kHz
Number of sensors 64
Detection capability Longitudinal and volumetric flaws
Encoder resolution 12 steps/mm
Distance from last sensor to probe tip 5.5 mm

FLEX-32-005-300k7M-DP-L

FLEX-32-005-300k7M-DP-L

Part number: Q2700086

This high-resolution surface ECA flex probe is designed for detecting small flaws on complex materials.

Typical Applications:

  • Longitudinal crack detection
  • Ability to support various product shapes
  • High-resolution detection of very small flaws
  • Detection of surface-breaking defects

Specifications

Specification Value
Coverage 32 mm
Resolution 0.5 mm
Frequency range 300 kHz to 7 MHz
Number of sensors 64
Detection capability Longitudinal cracks
Distance from last sensor to probe tip 1.5 mm from tip

FLEX-64-010-200k7M-DP-L

FLEX-64-010-200k7M-DP-L

Part number: Q2700087

This high-resolution surface ECA flex probe is designed for bead seat inspection.

Typical Applications:

  • Longitudinal crack detection
  • Ability to support various product shapes
  • High-resolution detection of very small flaws
  • Detection of surface-breaking defects
  • High mechanical flexibility of the sensors, to easily adapt to small corner radius of complex product shapes.

Specifications

Specification Value
Coverage 64 mm
Resolution 1 mm
Frequency range 200 kHz to 7 MHz
Number of sensors 64
Detection capability Longitudinal cracks
Distance from last sensor to probe tip 3 mm from tip

FLEX-64-010-700k7M-AB-A

FLEX-64-010-700k7M-AB-A

Part number: Q2700085

This high-resolution surface ECA flex probe is designed for SCC and hot spot detection.

Typical Applications:

  • Crack detection
  • Multi-directional flaw detection
  • Ability to support various product shapes
  • High-resolution detection of very small flaws
  • Detection of any surface-breaking defects

Specifications

Specification Value
Coverage 64 mm
Resolution 1 mm
Frequency range 700 kHz to 7 MHz
Number of sensors 64
Detection capability 360° cracks
Distance from last sensor to probe tip 1.2 mm from tip

Choose the Right ECA Probe for Your Inspection

Model Best For Coverage Resolution
SURF-25-008-300k3M-DP-A High-resolution surface crack detection 25 mm 0.8 mm
SUBS-64-020-2k50k-DP-L Restricted-access sub-surface inspections 64 mm 2.0 mm
SUBS-128-020-2k50k-DP-L Rapid wide-area sub-surface scanning 128 mm 2.0 mm
FLEX-32-005-300k7M-DP-L Small defect detection on complex materials 32 mm 0.5 mm
FLEX-64-010-200k7M-DP-L Bead seat inspections 64 mm 1 mm
FLEX-64-010-700k7M-AB-A SCC and hot spot detection 64 mm 1 mm

Reliable Eddy Current Array Inspection Performance

Whether you need high-resolution crack detection around fasteners, scribeline inspection, corrosion detection under conductive materials, or rapid sub-surface scanning, our new eddy current array probe family provides the flexibility and performance required for modern nondestructive testing.

With integrated encoding, PCB sensor technology, automatic NORTEC 700 configuration, and operator-focused ergonomics, these ECA probes help improve inspection consistency, reduce setup time, and increase productivity.

Sorry, this page is not available in your country
Let us know what you're looking for by filling out the form below.
Sorry, this page is not available in your country